Notice
You are now leaving support.minitab.com.
Click Continue to proceed to:
Complete the following steps to specify which columns are factors in the design.
In this worksheet, A and B are control factors. Signal is a signal factor. The control factors are the only columns that Minitab requires to define a design. The signal factor is needed only if you have a dynamic Taguchi design, rather than a static Taguchi design.
| C1 | C2 | C4 |
|---|---|---|
| A | B | Signal |
| 1 | 1 | 1 |
| 1 | 1 | 4 |
| 1 | 1 | 8 |
| 1 | 2 | 1 |
| 1 | 2 | 4 |
| 1 | 2 | 8 |
| 2 | 1 | 1 |
You are now leaving support.minitab.com.
Click Continue to proceed to: