다변량 차트 방법 및 공식

원하는 방법 또는 공식을 선택하십시오.

Plotted Points of the Average Response with Variation Chart

To calculate the means for each of the factors, sort the response values by Factor 1, Factor 2, Factor 3, etc… Then calculate the means from right to left.

For example, suppose Measurement is the response and the 3 factors are Operator, Part, and Subcomponent.

C1 C2 C3 C4
측정값 조작자 부품 하위 구성요소
0.29 A 1 A
0.41 A 1 A
0.64 A 1 B
0.59 A 1 B
-0.56 A 2 A
-0.58 A 2 A
-0.48 A 2 B
-0.42 B 2 B
1.34 B 3 B
1.17 관측 중단 3 A
1.27 관측 중단 3 A
1.30 관측 중단 3 B
There are a total of 8 cell means defined by the 3 factors:
  • Cell mean 1 = (0.29 + 0.41)/2 = 0.35
  • Cell mean 2 = (0.64 + 0.59)/2 = 0.615
  • Cell mean 3 = (-0.56 - 0.58)/2 = –0.57
  • Cell mean 4 = -0.48
  • Cell mean 5 = -0.42
  • Cell mean 6 = 1.34
  • Cell mean 7 = (1.17 + 1.27)/2 = 1.22
  • Cell mean 8 = 1.30
There are 5 factor level means for Factor 2 (Part):
  • Mean 1 = (0.29 + 0.41 + 0.64+0.59)/4 = 0.4825
  • Mean 2 = (-0.56 - 0.58 - 0.48)/3 = –0.54
  • Mean 3 = -0.42
  • Mean 4 = 1.34
  • Mean 5 = (1.17 + 1.27 + 1.30)/3 = 1.246
There are 3 factor level means for Factor 1 (Operator):
  • Mean 1 = (0.29+0.41+0.64+0.59-0.56-0.58-0.48)/7 = 0.044
  • Mean 2 = (-0.42 + 1.34)/2 = 0.46
  • Mean 3 = (1.17 + 1.27 + 1.30)/2 = 1.246

The overall mean = average of all response values.

The range bar within in each cell is produced by connecting the minimum data point with the maximum data point inside the cell. If there is no replicate in a cell, no range bar is produced for the cell.

Plotted Points of the Standard Deviation Chart

The plotted points are the sample standard deviations within each cell. The mean of the standard deviations equals the average of all standard deviations.

이 사이트를 사용하면 분석 및 사용자 개인 컨텐츠에 대한 쿠키 사용에 동의하는 것입니다.  당사의 개인정보 보호정책을 확인하십시오