Minitab®  Support

Specify display design options for Display Design

Learn more about Minitab
Stat > DOE > Display Design

Select how to display design points in the worksheet and whether to use coded units or uncoded units.

Minitab displays the design in coded units or uncoded units.
  • Coded units: Coded units are convenient values for comparing factors. If you did not assign factor levels, Minitab uses the default coded units of 1, 2, 3, and so on.
  • Uncoded units: Uncoded units are actual factor values. If you assign levels in the Factors sub-dialog box when you create a Taguchi design, Minitab displays them in the worksheet.
Coded Units
C1-T1 C2 C3 C4 C5 C6
Material Diameter Dimples Thickness Driver Iron
1 1 1 1 247.5 234.3
1 1 2 2 224.4 214.5
1 2 1 1 59.4 49.5
1 2 2 2 75.9 72.6
2 1 1 2 155.1 148.5
2 1 2 1 39.6 29.7
2 2 1 2 92.4 82.5
2 2 2 1 21.9 18.6
Uncoded Units
C1-T1 C2 C3 C4 C5 C6
Material Diameter Dimples Thickness Driver Iron
Liquid 118 392 0.03 247.5 234.3
Liquid 118 422 0.06 224.4 214.5
Liquid 156 392 0.03 59.4 49.5
Liquid 156 422 0.06 75.9 72.6
Tungsten 118 392 0.06 155.1 148.5
Tungsten 118 422 0.03 39.6 29.7
Tungsten 156 392 0.06 92.4 82.5
Tungsten 156 422 0.03 21.9 18.6
Copyright © 2026 Minitab, LLC. All rights Reserved.