Complete the following steps to interpret Power and Sample
Size for General Full Factorial Design. Key output includes the maximum difference between the main effect means, the number of replicates, the power, the total number of runs, and the power curve.
Using the values of the two power function variables that you entered, Minitab calculates the number of replicates, the value of the maximum difference between main effect means, or the power of the design.
Values of the maximum difference between main effect means
The maximum difference is the difference that you want to detect between the factor levels that have the highest and lowest means. The calculations use the factor that has the most levels to produce calculations that are conservative for other factors. Minitab calculates the smallest difference that the design detects. More replicates give the design the ability to detect smaller differences. Usually, you want to be able to detect the smallest difference that has practical consequences for your application.
If you enter the value of the maximum difference between main effect means and the power value, Minitab calculates the number of replicates. Replicates are multiple experimental runs with the same factor settings. Because the number of replicates is an integer value, the actual power can be slightly greater than your target value.
If you increase the number of replicates, the power of your design also increases. You want enough replicates to achieve adequate power.
For every case, Minitab calculates the total runs from the number of replicates. The number of runs in a single replicate is the product of the numbers of levels. The total number of runs is the product of this base design size and the number of replicates.
If you enter the number of replicates and the maximum difference between main effect means, Minitab calculates the power value. Power is the probability that you will correctly find a significant difference. A power value of 0.9 is usually considered enough. A value of 0.9 indicates that you have a 90% chance of detecting the difference between the factor settings. With other design properties held constant, when the total number of runs is smaller or the maximum is smaller, the design has less power.
Step 2: Examine the power curve
Use the power curve to assess the appropriate properties for your design.
The power curve represents the relationship between power and maximum difference for each number of replicates. Each symbol on the power curve represents a calculated value based on the properties that you enter. For example, if you enter a number of replicates and a power value, Minitab calculates the corresponding maximum difference and displays the calculated value on the graph.
Examine the values on the curve to determine the difference between the largest and smallest means for the factor with the most levels that the experiment detects at a certain power value and number of replicates. A power value of 0.9 is usually considered adequate. However, some practitioners consider a power value of 0.8 to be adequate. If a design has low power, you might fail to detect a difference that is practically significant. Increasing the total number of experimental runs increases the power of your design. You want enough experimental runs in your design to achieve adequate power. A design has more power to detect a larger difference than a smaller difference.