If your process has a target, enter the value. If you enter a target value, Minitab calculates Cpm, a capability index that also considers how much the data deviate from the target.

Enter the width of the tolerance in number of standard deviations (σ). By default, the tolerance is 6 standard deviations wide (3 standard deviations on each side of the process mean).

Minitab interprets the K value as the width of a two-sided tolerance. If you want to use a one-sided tolerance, enter a two-sided tolerance value that is twice that of the one-sided tolerance. For example, if you want to use a one-sided tolerance of 3σ, enter 6.

If you want the tolerance value that you enter to be the default setting for every capability analysis that you perform, choose and enter the default tolerance.

By default, Minitab performs both between/within subgroup and overall capability analyses. If you do not want to perform one of the analyses, deselect that checkbox.

- Between/within analysis
- Perform the between/within subgroup analysis, which assesses the variation both within and across subgroups. This analysis estimates how well your process could perform if other sources of systemic variation, besides the variation between and within subgroups, could be eliminated.
- Overall analysis
- Perform the overall analysis, which indicates the actual capability of your process. This analysis estimates what your customer actually experiences.

Select how you want to display the expected and observed out-of-specification values:

- Parts per million: Display the values in parts per million (PPM).
- Percents: Display the values as percentages.

Select the measures of capability that you want Minitab to display:

- Capability stats (Cp, Pp): Calculate and display capability indices, such as Cp and Pp.
- Benchmark Z’s (σ level): Calculate and display Z.bench values. The choice to use Z.bench often depends on company or industry practices.

- Include confidence intervals
- Select to display confidence intervals for the capability indices.
- Confidence level
- Enter a confidence level between 0 and 100. Usually, a confidence level of 95% works well. A 95% confidence level indicates that if you took 100 random samples from the process, you could expect approximately 95 of the samples to produce confidence intervals that contain the actual value of the capability index for the process (if all the process data could be collected and analyzed).
- Confidence intervals
- Select the type of confidence interval or bound that you want to display:
- One-sided: Displays lower confidence bounds for capability indices and upper confidence bounds for PPM or % out-of-specification limits. Use one-sided confidence bounds for the following:
- To be more confident that a capability index is greater than a required value. For example, to be more confident that Cp is greater than 1.33.
- To be more confident that a PPM or % out-of-specification limits is less than a required value. For example, to be more confident that PPM Total out-of-specification is less than 100.

- Two-sided: Display a confidence interval that has both a lower and an upper confidence bound.

- One-sided: Displays lower confidence bounds for capability indices and upper confidence bounds for PPM or % out-of-specification limits. Use one-sided confidence bounds for the following:

If you want to change which statistics display by default, choose and change the default display setting.

You can enter a new title for the process capability report.