- PPM < LSL for expected overall performance
- PPM > USL for expected overall performance
- PPM Total for expected overall performance
- Confidence intervals for PPM total for expected overall performance when both LSL and USL are known
- Confidence intervals for PPM total for expected overall performance for a process with one specification limit

The parts per million less than the lower specification limit (PPM < LSL) and the percentage less than the lower specification limit (% < LSL) are both found from the probability that a part is below the specification limit (*P*(*x* < LSL)).

PPM < LSL and % < LSL are multiples of the probability:

Confidence intervals for *P*(*x* < LSL) are given by the following formulas:

where

Confidence intervals for PPM < LSL and % < LSL are found by multiplying the confidence intervals for the probability by a constant.

For a one-sided bound, the calculations follow:

Minitab solves the following equation to find *p*_{1}:

where

Term | Description |
---|---|

LSL | the lower specification limit |

USL | the upper specification limit |

LB | the lower bound |

UB | the upper bound |

the Cumulative Distribution Function (CDF) from a standard normal distribution | |

the inverse CDF from a standard normal distribution | |

the (1 - α/2)^{th} percentile of the standard normal distribution | |

α | the alpha for the confidence level |

the process mean (estimated from the sample date or a historical value) | |

s | the sample overall standard deviation |

N | the total number of measurements |

υ | the degrees of freedom for s |

a random variable that is distributed as a non-central t distribution with degrees of freedom and non-centrality parameter δ |

The parts per million greater than the upper specification limit (PPM > USL) and the percentage greater than the upper specification limit (% > USL) are both found from the probability that a part is above the specification limit (P(x > USL)).

PPM > USL and % > USL are multiples of the probability:

Confidence intervals for *P*(*x* > USL) are given by the following formulas:

where

Confidence intervals for PPM > USL and % > USL are found by multiplying the confidence intervals for the probability by a constant.

For a one-sided bound, the calculations follow:

Minitab solves the following equation to find *p*_{1}:

where

Term | Description |
---|---|

USL | the upper specification limit |

PPM | the parts per million |

LB | the lower bound |

UB | the upper bound |

the Cumulative Distribution Function (CDF) from a standard normal distribution | |

the inverse CDF from a standard normal distribution | |

the (1 - α/2)^{th} percentile of the standard normal distribution | |

α | the alpha for the confidence level |

the process mean (estimated from the sample date or a historical value) | |

s | the sample overall standard deviation |

N | the total number of measurements |

υ | the degrees of freedom for s |

a random variable that is distributed as a non-central t distribution with degrees of freedom and non-centrality parameter δ |

The expected number of parts per million that are outside of the specification limits, based on the overall variation of the process, is

Term | Description |
---|---|

PPM | Parts per million |

LSL | Lower specification limit |

USL | Upper specification limit |

Φ (X) | Cumulative distribution function (CDF) of a standard normal distribution |

Average of the observations | |

s | Overall standard deviation |

The total Parts Per Million (PPM) out-of-specification and the percentage out-of-specification are both found from the probability that a part is outside the specification limits.

The upper and lower bounds for the probability that a part is out-of-specification have the following formulas:

where

To calculate , substitute the sample estimates for the parameters in the formula for :

where

The bounds for the total PPM out-of-specification and for the total percentage out-of-specification are found by multiplying the bounds for the probability by a constant.

The upper bound for the probability a part is out-of-specification has the following formula:

where and are the same as for a two-sided interval.

The upper bound for the total PPM out-of-specification and for the percentage out-of-specification are found by multiplying the bound for the probability by a constant.

Term | Description |
---|---|

LSL | the lower specification limit |

USL | the upper specification limit |

PPM | the parts per million |

LB | the lower bound |

UB | the upper bound |

the Cumulative Distribution Function (CDF) from a standard normal distribution | |

the inverse CDF from a standard normal distribution | |

the (1 - α/2)^{th} percentile of the standard normal distribution | |

α | the alpha for the confidence level |

the process mean (estimated from the sample date or a historical value) | |

s | the sample overall standard deviation |

N | the total number of measurements |

υ | the degrees of freedom for s |

a random variable that is distributed as a non-central t distribution with degrees of freedom and non-centrality parameter δ |

For a process with only a Lower Specification Limit (LSL), the confidence interval for the total PPM or the total percentage out of specification is the same as the confidence interval for the PPM < LSL or % < LSL. Go to the section PPM < LSL for expected overall performance.

For a process with only an Upper Specification Limit (USL), the confidence interval for the total PPM or the total percentage out of specification is the same as the confidence interval for the PPM > USL or % > USL. Go to the section on PPM > USL for expected overall performance.