Example of comparing attributes acceptance sampling plans

A representative from a sales department purchases pens from a vendor to give away at trade shows. Each shipment of pens has a lot size of 5000 pens. The sales representative has a sampling plan to inspect 52 pens from each lot. If the number of defective pens is 2 or less, the sales representative accepts the entire shipment. Assume that the AQL is 1.5% and the RQL is 10%.

The sales manager wants to evaluate the risk associated with reducing the number of pens in the sample to 25 pens and reducing the acceptance number to 1.

  1. Choose Stat > Quality Tools > Acceptance Sampling by Attributes.
  2. From the drop-down list, select Compare User Defined Sampling Plans.
  3. In Measurement type, select Go / no go (defective).
  4. In Units for quality levels, select Percent defective.
  5. In Acceptable quality level (AQL), enter 1.5.
  6. In Rejectable quality level (RQL or LTPD), enter 10.
  7. In Sample sizes, enter 52 25.
  8. In Acceptance numbers, enter 2 1.
  9. In Lot size, enter 5000.
  10. Click OK.

Interpret the results

The manager compares the graphs from the different sampling plans and realizes that the two sample plans are fairly similar when the incoming quality is near 1.5% defective, but are fairly different when the incoming quality is near 10% defective.

At the AQL (1.5%), the probability of acceptance changes by a very small amount (0.957 – 0.946), and the AOQ and the ATI differences are also minimal. At the RQL (10%), the probability of acceptance changes by a much larger amount (0.271 – 0.097), and the AOQ and the ATI differences are also much larger.

The manager decides that it is easy and inexpensive to sample pens, and does not want to risk the overall poorer average outgoing quality or the overall higher number of pens sampled, due to rectifying inspection, when the incoming quality is poor.

Acceptance Sampling by Attributes

Measurement type: Go/no go Lot quality in percent defective Lot size: 5000 Use binomial distribution to calculate probability of acceptance
Method Acceptable Quality Level (AQL) 1.5 Rejectable Quality Level (RQL or LTPD) 10
Compare User Defined Plan(s) Sample Acceptance Percent Probability Probability Size(n) Number(c) Defective Accepting Rejecting AOQ ATI 52 2 1.5 0.957 0.043 1.420 266.2 52 2 10.0 0.097 0.903 0.956 4521.9 25 1 1.5 0.946 0.054 1.412 292.4 25 1 10.0 0.271 0.729 2.698 3650.8
Average Outgoing Quality Limit(s) (AOQL) Sample Acceptance At Percent Size(n) Number(c) AOQL Defective 52 2 2.603 4.300 25 1 3.303 6.250 Accept lot if defective items in n sampled ≤ c; Otherwise reject.
By using this site you agree to the use of cookies for analytics and personalized content.  Read our policy