Methods for Normal Capability Sixpack

Estimating standard deviation

Normal capability analysis estimates within-subgroup standard deviation and overall standard deviation.

Within-subgroup standard deviation

The method used to estimate σwithin depends on the subgroup size.

When subgroup size > 1, Minitab estimates σwithin using one of the following methods:
  • Pooled standard deviation:

    where:

    Note

    If you change the default method and choose not to use the unbiasing constant, σwithin is estimated by Sp.

    TermDescription
    dDegrees of freedom for Sp= Σ (ni- 1)
    Xij jth observation in the ith subgroup
    iMean of the ith subgroup
    niNumber of observations in the ith subgroup
    C4(d+1)Unbiasing constant
    Γ(·)Gamma function
  • Average of subgroup ranges (Rbar):

    where:

    If n are all the same:

    TermDescription
    riRange of the ith subgroup
    d2 (ni) An unbiasing constant read from a table (for more information, see the section Unbiasing constants d2(), d3(), and d4())
    d3 (ni) An unbiasing constant read from a table (for more information, see the section Unbiasing constants d2(), d3(), and d4())
    niNumber of observations in the ith subgroup
  • Average of subgroup standard deviations (Sbar):

    where:

    Note

    If you change the default setting and do not use the unbiasing constant, σwithin is estimated by Σ Si / number of subgroups.

    TermDescription
    C4(ni)Unbiasing constant (as defined for pooled standard deviation)
    SiStandard deviation of subgroup i
    niNumber of observations in the ith subgroup
When subgroup size = 1, Minitab estimates σwithin using one of the following methods:
  • Average of moving range:

    where:

    TermDescription
    RiThe ith moving range
    wThe number of observations used in the moving range. The default is w = 2
    d2(w)An unbiasing constant read from a table (for more information, see the section Unbiasing constants d2(), d3(), and d4())
  • Median of moving range:

    where:

    TermDescription
    MRiThe ith moving range
    MRbar̅Median of the MRi
    wThe number of observations used in the moving range. The default is w = 2
    d4(w)An unbiasing constant read from a table (for more information, see the section Unbiasing constants d2(), d3(), and d4())
  • Square root of mean squared successive differences (MSSD):
    Note

    If you change the default setting and do not use the unbiasing constant, σwithin is estimated by

    TermDescription
    diSuccessive differences
    C4(ni)Unbiasing constant (as defined for the pooled standard deviation)
    C4'(ni)Unbiasing constant ≈ c4(ni) (for more information, see the section Unbiasing constant c4'())
    NTotal number of observations
    niNumber of observations in the ith subgroup

Overall standard deviation

where:

Note

By default, Minitab does not use the unbiasing constant when estimating σoverall. σoverall is estimated by S. If you want to estimate overall standard deviation using the unbiasing constant, you can change this option on the Estimate subdialog box when you perform the capability analysis. If you always want Minitab to use the unbiasing constant by default, choose File > Options > Control Charts and Quality Tools > Estimating Standard Deviation and select the appropriate options.

TermDescription
xijThe jth observation in the ith subgroup
Process mean
niNumber of observations in the ith subgroup
C4 (N)Unbiasing constant (as defined for the pooled standard deviation)
N (or Σ ni)Total number of observations

Box-Cox transformation

The Box-Cox transformation estimates a lambda value, as shown in the following table, which minimizes the standard deviation of a standardized transformed variable. The resulting transformation is Yλ when λ ҂  0 and ln Y when λ = 0.

The Box-Cox method searches through many types of transformations. The following table shows some common transformations where Y' is the transform of the data Y.

Lambda (λ) value Transformation

Algorithm for Johnson transformation

The Johnson transformation optimally selects one of three families of distribution to transform the data to follow a normal distribution.

Johnson family Transformation function Range
SB γ + η ln [(x – ε) / (λ + ε – x)] η, λ > 0, –∞ < γ < ∞ , –∞ < ε < ∞, ε < x < ε + λ
SL γ + η ln (x – ε) η > 0, –∞ < γ < ∞, –∞ < ε < ∞, ε < x
SU γ + η Sinh–1 [(x – ε) / λ] , where

Sinh–1(x) = ln [x + sqrt (1 + x2)]

η, λ > 0, –∞ < γ < ∞, –∞ < ε < ∞, –∞ < x < ∞

The algorithm uses the following procedure:

  1. Considers almost all potential transformation functions from the Johnson system.
  2. Estimates the parameters in the function using the method described in Chou, et al.1
  3. Transforms the data using the transformation function.
  4. Calculates Anderson-Darling statistics and the corresponding p-value for the transformed data.
  5. Selects the transformation function that has the largest p-value that is greater than the p-value criterion (default is 0.10) that you specify in the Transform dialog box. Otherwise, no transformation is appropriate.

Notation

TermDescription
SBThe Johnson family distribution with the variable bounded (B)
SLThe Johnson family distribution with the variable lognormal (L)
SUThe Johnson family distribution with the variable unbounded (U)

For more information on the Johnson transformation, see Chou, et al.1 Minitab replaces the Shapiro-Wilks normality test used in that text with the Anderson-Darling test.

For information on the probability plot, percentiles, and their confidence intervals, go to Methods and formulas for distributions in Individual Distribution Identification.

Unbiasing constants d2(), d3(), and d4()

d2(N) is the expected value of the range of N observations from a normal population with standard deviation = 1. Thus, if r is the range of a sample of N observations from a normal distribution with standard deviation = σ, then E(r) = d2(N)σ.

d3(N) is the standard deviation of the range of N observations from a normal population with σ = 1. Thus, if r is the range of a sample of N observations from a normal distribution with standard deviation = σ, then stdev(r) = d3(N)σ.

Use the following table to find an unbiasing constant for a given value, N. (To determine the value of N, consult the formula for the statistic of interest.)

For values of N from 51 to 100, use the following approximation for d2(N):
For values of N from 26 to 100, use the following approximations for d3(N) and d4(N):
For more information on these constants, see the following:
  • D. J. Wheeler and D. S. Chambers. (1992). Understanding Statistical Process Control, Second Edition, SPC Press, Inc.
  • H. Leon Harter (1960). "Tables of Range and Studentized Range". The Annals of Mathematical Statistics, Vol. 31, No. 4, Institute of Mathematical Statistics, 1122−1147.
Table 1. Table of values
N d2(N) d3(N) d4(N)
2 1.128 0.8525 0.954
3 1.693 0.8884 1.588
4 2.059 0.8798 1.978
5 2.326 0.8641 2.257
6 2.534 0.8480 2.472
7 2.704 0.8332 2.645
8 2.847 0.8198 2.791
9 2.970 0.8078 2.915
10 3.078 0.7971 3.024
11 3.173 0.7873 3.121
12 3.258 0.7785 3.207
13 3.336 0.7704 3.285
14 3.407 0.7630 3.356
15 3.472 0.7562 3.422
16 3.532 0.7499 3.482
17 3.588 0.7441 3.538
18 3.640 0.7386 3.591
19 3.689 0.7335 3.640
20 3.735 0.7287 3.686
21 3.778 0.7242 3.730
22 3.819 0.7199 3.771
23 3.858 0.7159 3.811
24 3.895 0.7121 3.847
25 3.931 0.7084 3.883
N d2(N)
26 3.964
27 3.997
28 4.027
29 4.057
30 4.086
31 4.113
32 4.139
33 4.165
34 4.189
35 4.213
36 4.236
37 4.259
38 4.280
39 4.301
40 4.322
41 4.341
42 4.361
43 4.379
44 4.398
45 4.415
46 4.433
47 4.450
48 4.466
49 4.482
50 4.498

Unbiasing constants c4() and c5()

c4()

c5()

Notation

TermDescription
Γ()gamma function

Unbiasing constant c4'()

Use the following tables to find values for the unbiasing constant, c4'(), which is used in the formulas for the square root of MSSD method of estimating sigma.

N c4'(N) N c4'(N) N c4'(N)
2 0.797850 41 0.990797 80 0.995215
3 0.871530 42 0.991013 81 0.995272
4 0.905763 43 0.991218 82 0.995328
5 0.925222 44 0.991415 83 0.995383
6 0.937892 45 0.991602 84 0.995436
7 0.946837 46 0.991782 85 0.995489
8 0.953503 47 0.991953 86 0.995539
9 0.958669 48 0.992118 87 0.995589
10 0.962793 49 0.992276 88 0.995638
11 0.966163 50 0.992427 89 0.995685
12 0.968968 51 0.992573 90 0.995732
13 0.971341 52 0.992713 91 0.995777
14 0.973375 53 0.992848 92 0.995822
15 0.975137 54 0.992978 93 0.995865
16 0.976679 55 0.993103 94 0.995908
17 0.978039 56 0.993224 95 0.995949
18 0.979249 57 0.993340 96 0.995990
19 0.980331 58 0.993452 97 0.996030
20 0.981305 59 0.993561 98 0.996069
21 0.982187 60 0.993666 99 0.996108
22 0.982988 61 0.993767 100 0.996145
23 0.983720 62 0.993866 101 0.996182
24 0.984391 63 0.993961 102 0.996218
25 0.985009 64 0.994053 103 0.996253
26 0.985579 65 0.994142 104 0.996288
27 0.986107 66 0.994229 105 0.996322
28 0.986597 67 0.994313 106 0.996356
29 0.987054 68 0.994395 107 0.996389
30 0.987480 69 0.994474 108 0.996421
31 0.987878 70 0.994551 109 0.996452
32 0.988252 71 0.994626 110 0.996483
33 0.988603 72 0.994699 111 0.996514
34 0.988934 73 0.994769 112 0.996544
35 0.989246 74 0.994838 113 0.996573
36 0.989540 75 0.994905 114 0.996602
37 0.989819 76 0.994970 115 0.996631
38 0.990083 77 0.995034 116 0.996658
39 0.990333 78 0.995096 117 0.996686
40 0.990571 79 0.995156 118 0.996713
N c4'(N) N c4'(N) N c4'(N)
119 0.996739 160 0.997541 201 0.998016
120 0.996765 161 0.997555 202 0.998025
121 0.996791 162 0.997570 203 0.998034
122 0.996816 163 0.997584 204 0.998043
123 0.996841 164 0.997598 205 0.998052
124 0.996865 165 0.997612 206 0.998061
125 0.996889 166 0.997625 207 0.998070
126 0.996913 167 0.997639 208 0.998078
127 0.996936 168 0.997652 209 0.998087
128 0.996959 169 0.997665 210 0.998095
129 0.996982 170 0.997678 211 0.998104
130 0.997004 171 0.997691 212 0.998112
131 0.997026 172 0.997703 213 0.998120
132 0.997047 173 0.997716 214 0.998128
133 0.997069 174 0.997728 215 0.998137
134 0.997089 175 0.997741 216 0.998145
135 0.997110 176 0.997753 217 0.998152
136 0.997130 177 0.997765 218 0.998160
137 0.997150 178 0.997776 219 0.998168
138 0.997170 179 0.997788 220 0.998176
139 0.997189 180 0.997800 221 0.998184
140 0.997209 181 0.997811 222 0.998191
141 0.997227 182 0.997822 223 0.998199
142 0.997246 183 0.997834 224 0.998206
143 0.997264 184 0.997845 225 0.998214
144 0.997282 185 0.997856 226 0.998221
145 0.997300 186 0.997866 227 0.998228
146 0.997318 187 0.997877 228 0.998235
147 0.997335 188 0.997888 229 0.998242
148 0.997352 189 0.997898 230 0.998250
149 0.997369 190 0.997909 231 0.998257
150 0.997386 191 0.997919 232 0.998263
151 0.997402 192 0.997929 233 0.998270
152 0.997419 193 0.997939 234 0.998277
153 0.997435 194 0.997949 235 0.998284
154 0.997450 195 0.997959 236 0.998291
155 0.997466 196 0.997969 237 0.998297
156 0.997481 197 0.997978 238 0.998304
157 0.997497 198 0.997988 239 0.998311
158 0.997512 199 0.997997 240 0.998317
159 0.997526 200 0.998007 241 0.998323
N c4'(N) N c4'(N) N c4'(N)
242 0.998330 283 0.998553 324 0.998720
243 0.998336 284 0.998558 325 0.998723
244 0.998342 285 0.998562 326 0.998727
245 0.998349 286 0.998567 327 0.998730
246 0.998355 287 0.998571 328 0.998734
247 0.998361 288 0.998576 329 0.998737
248 0.998367 289 0.998580 330 0.998740
249 0.998373 290 0.998585 331 0.998744
250 0.998379 291 0.998589 332 0.998747
251 0.998385 292 0.998593 333 0.998751
252 0.998391 293 0.998598 334 0.998754
253 0.998397 294 0.998602 335 0.998757
254 0.998403 295 0.998606 336 0.998761
255 0.998408 296 0.998611 337 0.998764
256 0.998414 297 0.998615 338 0.998767
257 0.998420 298 0.998619 339 0.998770
258 0.998425 299 0.998623 340 0.998774
259 0.998431 300 0.998627 341 0.998777
260 0.998436 301 0.998632 342 0.998780
261 0.998442 302 0.998636 343 0.998783
262 0.998447 303 0.998640 344 0.998786
263 0.998453 304 0.998644 345 0.998790
264 0.998458 305 0.998648 346 0.998793
265 0.998463 306 0.998652 347 0.998796
266 0.998469 307 0.998656 348 0.998799
267 0.998474 308 0.998660 349 0.998802
268 0.998479 309 0.998664 350 0.998805
269 0.998484 310 0.998668 351 0.998808
270 0.998489 311 0.998671 352 0.998811
271 0.998495 312 0.998675 353 0.998814
272 0.998500 313 0.998679 354 0.998817
273 0.998505 314 0.998683 355 0.998820
274 0.998510 315 0.998687 356 0.998823
275 0.998515 316 0.998690 357 0.998826
276 0.998519 317 0.998694 358 0.998829
277 0.998524 318 0.998698 359 0.998832
278 0.998529 319 0.998701 360 0.998835
279 0.998534 320 0.998705 361 0.998837
280 0.998539 321 0.998709 362 0.998840
281 0.998544 322 0.998712 363 0.998843
282 0.998548 323 0.998716 364 0.998846
k c4'(k) k c4'(k) k c4'(k)
365 0.998849 411 0.998963 457 0.999054
366 0.998851 412 0.998965 458 0.999056
367 0.998854 413 0.998967 459 0.999058
368 0.998857 414 0.998970 460 0.999060
369 0.998860 415 0.998972 461 0.999061
370 0.998862 416 0.998974 462 0.999063
371 0.998865 417 0.998976 463 0.999065
372 0.998868 418 0.998978 464 0.999067
373 0.998871 419 0.998980 465 0.999068
374 0.998873 420 0.998982 466 0.999070
375 0.998876 421 0.998985 467 0.999072
376 0.998879 422 0.998987 468 0.999073
377 0.998881 423 0.998989 469 0.999075
378 0.998884 424 0.998991 470 0.999077
379 0.998886 425 0.998993 471 0.999078
380 0.998889 426 0.998995 472 0.999080
381 0.998892 427 0.998997 473 0.999082
382 0.998894 428 0.998999 474 0.999084
383 0.998897 429 0.999001 475 0.999085
384 0.998899 430 0.999003 476 0.999087
385 0.998902 431 0.999005 477 0.999088
386 0.998904 432 0.999007 478 0.999090
387 0.998907 433 0.999009 479 0.999092
388 0.998909 434 0.999011 480 0.999093
389 0.998912 435 0.999013 481 0.999095
390 0.998914 436 0.999015 482 0.999097
391 0.998917 437 0.999017 483 0.999098
392 0.998919 438 0.999019 484 0.999100
393 0.998921 439 0.999021 485 0.999101
394 0.998924 440 0.999023 486 0.999103
395 0.998926 441 0.999025 487 0.999104
396 0.998929 442 0.999027 488 0.999106
397 0.998931 443 0.999028 489 0.999108
398 0.998933 444 0.999030 490 0.999109
399 0.998936 445 0.999032 491 0.999111
400 0.998938 446 0.999034 492 0.999112
401 0.998940 447 0.999036 493 0.999114
402 0.998943 448 0.999038 494 0.999115
403 0.998945 449 0.999040 495 0.999117
404 0.998947 450 0.999042 496 0.999118
405 0.998950 451 0.999043 497 0.999120
406 0.998952 452 0.999045 498 0.999121
407 0.998954 453 0.999047 499 0.999123
408 0.998956 454 0.999049 500 0.999124
409 0.998959 455 0.999051    
410 0.998961 456 0.999052    
1 Y. Chou, A.M. Polansky, and R.L. Mason (1998). "Transforming Nonnormal Data to Normality in Statistical Process Control", Journal of Quality Technology, 30, April, 133–141.