Enter your data for Contour Plot

Complete the following steps to specify the variables that you want to graph.

This dialog box varies by the type of model that you used to fit the data.

In This Topic

All model types except mixture designs
Mixture designs

All model types except mixture designs

To perform this analysis in Minitab, go to the menu that you used to fit the model, then choose Contour Plot. For example, if you fit a Poisson model, choose Stat > Regression > Poisson Regression > Contour Plot.
From Response, select the response variable that you want to plot.
Note
Only response variables with up-to-date models from the same analysis are in the list. If you do not see a response that you want, re-fit the model. For more information, go to Stored model overview.
Under Variables, indicate which variables that you want to include in the plots.
- Select a pair of variables for a single plot: Display a graph for only one pair (x, y) of variables with the fitted response (z). You can determine which variable is plotted on the x-axis (horizontal axis) and on the y-axis (vertical axis).
- Generate plots for all pairs of continuous variables: Create graphs for all possible combinations of (x, y) variables with the fitted response (z). With n variables, Minitab creates (n*(n-1))/2 plots. You can display the plots on one graph or display each plot on a separate page.

Mixture designs

To display a contour plot for a mixture design, choose Stat > DOE > Mixture > Contour/Surface Plots.
Select Contour plot and then click the corresponding Setup button.
From Response, select the response variable that you want to plot.
Under Components or Process Variables, select the option that displays the type and number of variables that you want to plot. If an option is not available, your design does has an insufficient number of the type of variable that is required.

Select a triplet of components for a single plot

Choose to plot three components. You must select one component to display on each of the three axes.

Select four components for a matrix plot

Choose to display four simplex design plots in a single page layout. Then, choose four components from the drop-down list.

Generate plots for all triplets of components

Choose to generate plots for all triplets of components. You must also choose whether you want to display all plots on separate panels of one graph or in separate graphs.

Select a pair of numeric process variables for a single plot

Choose to generate a contour plot for one pair of process variables. You must select one process variable to display on each of the two axes.

Generate plots for all pairs of numeric process variables

Choose to generate plots for all combinations of process variable levels. You must also choose whether you want to display all plots on separate panels of one graph or in separate graphs.
Under Model Fitted in, choose whether you want to refit the model in Proportions or Pseudocomponents.
Under Component Unit in Plot(s), choose whether you want to display the components in amounts, proportions, or pseudocomponents.
Note
For more information, go to Amounts, proportions, and pseudo-components scales for representing the data in a mixtures design and What is a pseudo-component?.
Select Plot all level combinations if you want to display a single contour plot and include each level of the process variables in its own layout. If you do not select this, each layout has a holding level for each process variable.
Select Plot all mixture amounts if you want to display a single contour plot and include all levels of the amount variable in a single layout.

Enter your data for Contour Plot

In This Topic

All model types except mixture designs

Note

Mixture designs

Note