Add assignable causes, corrective actions, and comments to plotted points
- From the control chart on the Process Quality Snapshot or Station Dashboard, double-click the point to open the details pane.
- Select Edit for the plotted point, or for each individual observation.
- Enter relevant assignable causes, corrective actions, and comments, then select OK.
To display or suppress indicators of point annotations on the Station Dashboard, open the Settings
and select
or deselect Show point annotations.
Show failed tests of plotted points
on the
Station Dashboard and select or deselect Show failed tests. For more information on how to change the default test settings, go to Tests for special causes.Note
Failed test numbers always display on the Process Quality Snapshot.
Specify additional limits to display
Control charts always display the control limits unless you configure the control chart to not use control limits. For more information, go to Control chart settings.
You can choose whether to display or suppress the action limits and the specification limits on the control charts of the Station Dashboard. Any specified limits always display on the Process Quality Snapshot.
on the
Station Dashboard and select or deselect Show all limits. Note
Specification limits apply only to individual observations of continuous measures and subgroups of attribute measures. Thus, specification limits can only be displayed on I-MR charts and attribute charts.
Specify the x-axis label
- Process Quality Snapshot
- Select the
icon, then select Advanced
options to select Date/Time or Index. The x-axis label applies to all the control charts in the station. - Station Dashboard
- Open the Settings
to select or deselect Show Date/Time to show either a timestamp or an index value.
