# Example of Power and Sample Size for 1-Sample Equivalence Test

A packaging engineer wants to test a new method to seal snack bags. The force that is required to open the bags should be within 10% of the target value of 4.2 N (Newtons). Before collecting the data for a 1-sample equivalence test, the engineer uses a power and sample size calculation to determine how large the sample must be to obtain a power of 80% (0.8). From previous samples, the engineer estimates the standard deviation of the population is 0.332.

1. Choose Stat > Power and Sample Size > Equivalence Tests > 1-Sample.
2. From What do you want to determine? (Alternative hypothesis), choose Lower limit < test mean - target < upper limit.
3. In Lower limit, enter –0.42. In Upper limit, enter 0.42.
4. In Differences (within the limits), enter 0 0.1 0.2 0.3.
5. In Power values, enter 0.8.
6. In Standard deviation, enter 0.332.
7. Click OK.

## Interpret the results

If the difference is 0 (the mean force is on target), then the engineer needs a sample size of 7 to achieve a power of 0.8. If the engineer uses a sample size of 9, the power of the test is over 0.9 for a difference of 0.

When the difference is closer to the upper equivalence limit (0.42), the engineer needs a larger sample size to achieve the same power. For example, for a difference of 0.3, the engineer needs a sample size of 49 to achieve a power of 0.8.

For any sample size, as the difference approaches the lower equivalence limit or the upper equivalence limit, the power of the test decreases and approaches α (alpha, which is the risk of claiming equivalence when it is not true).

By using this site you agree to the use of cookies for analytics and personalized content.  Read our policy