Injektionsprozess

A team of researchers wants to use data from an injection molding process to study settings for machines that maximize one type of strength of a plastic part. The variables include controls on the machines, different plastic formulas, and the injection molding machines.

You can use this data to demonstrate Ermitteln von wichtigen Prädiktoren with TreeNet® Regression.

Maschine The machine that created the insulation: 1, 2, 3, or 4
Formel Formel1 or Formel2
Injektionsdruck Injection pressure: 75 or 150
Injektionstemperatur Injection temperature: 85 or 100
Kühltemperatur Cooling temperature: 25 or 45
Schmelztemperaturzone 1 The temperature at zone 1 of the injection nozzle
Schmelztemperaturzone 2 The temperature at zone 2 of the injection nozzle
Schmelztemperaturzone 3 The temperature at zone 3 of the injection nozzle
Schmelztemperaturzone 4 The temperature at zone 4 of the injection nozzle
Schmelztemperaturzone 5 The temperature at zone 5 of the injection nozzle
Formtemperatur The temperature setting for inside the mold during the injection process
Position ändern The distance of the screw when the process changes from flow control to pressure control
Schraubenkissen The amount of material in the barrel in front of the screw
Schraubendrehzahl How fast the screw rotates during the process
Haltedruck The hold pressure setting on the injection machine
Rückdruck The back pressure on the screw
Trocknungstemperatur The temperature inside the dryer for the part
Trocknungszeit The time the parts are inside the dryer
Kunststofftemperatur The temperature of the plastic entering the injection process
Kunststoffdurchfluss The flow rate of the plastic during the injection process
Temperatur bei der Messung Temperature at the time of the response measurements
Stärke The strength of the plastic part
Durch Ihre Nutzung dieser Website stimmen Sie zu, dass Cookies verwendet werden. Cookies dienen zu Analysezwecken und zum Bereitstellen personalisierter Inhalte.  Lesen Sie unsere Richtlinien